Brief Shipping Info | Small Ford Spares

Price from: £38.26 Each (£45.91 inc. VAT)

Set of 5 pre-cut HT leads for the Ford 105E engine, complete with sparking plug caps & trimmed ready for fitting to coil/distributor.
Please note the spark firing order 1-2-4-3 (1 is the...

details

Price from: £87.29 Each (£104.75 inc. VAT)

100E ignition service kit, fits all models 1953-61. Kit includes distributor cap, contact breaker points, rotor arm, condenser, spark plug lead set and four spark plugs.

details

Price from: £128.44 each (£154.13 inc. VAT)

New made part (not refurbished). Bolt hole centres 5" apart on flange.

details

Price from: £25.15 each (£30.18 inc. VAT)

Acorn screw in terminal connection to top

details

Price from: £40.00 each (£48.00 inc. VAT)

12 volt sport coil, offered with push in HT wire connection only

details

Price from: £235.80 each (£282.96 inc. VAT)

Refurbished distributor assembly for 1953 to 1959 models, with a flat side. D2A type unit. EXCHANGE item. Customer/core unit must be received and confirmed suitable for reconditioning before a...

details

Price from: £235.80 each (£282.96 inc. VAT)

Refurbished distributor assembly for 1959 to 1962 models, with a round cap. 23D4 type unit. Lucas part number 40655H. EXCHANGE item. Customer/core unit must be received and confirmed suitable for...

details

Price from: £37.51 each (£45.01 inc. VAT)

Flat side, 4 cylinder. Note the spark firing order 1-2-4-3 (1 is front cylinder)

details

Price from: £66.14 each (£79.37 inc. VAT)

Flat side - fits DKY4A and D2A4 type distributors - cables retained by small screws.

details

Price from: £33.10 each (£39.72 inc. VAT)

Round base

Note the spark firing order 1-2-4-3 (1 is front cylinder)

details

Price from: £34.91 each (£41.89 inc. VAT)

Note Ford the spark firing order 1-2-4-3 (1 is front cylinder)

100E (1961-62) side exit with round base,Austin Mini(1962/69),Austin A40(1961/67),Austin 1000(1963/67),Austin 1800(1964/67),Austin...

details

Price from: £9.57 each (£11.48 inc. VAT)

distributor cap spring clip, holds distributor cap onto the distributor body, fits distributors 1953-59, with flat sided cap. overall length 70mm, 8mm wide.

details

Price from: £40.17 each (£48.20 inc. VAT)

Set of 5 pre-cut HT leads for Ford 100E, complete with sparking plug caps & trimmed ready for fitting to coil/distributor.
Note the spark firing order 1-2-4-3 (1 is the front cylinder)...

details

Price from: £14.07 Each (£16.88 inc. VAT)

distributor base clamp plate, with bolt.

details

Price from: £11.40 each (£13.68 inc. VAT)

As Lucas 54413006 B1344 condenser unit.
also listed as Lucas DCB110, 418113 & 422368.
also applicable to
Austin A40 1948-52
Austin FX3 Taxi 2.2 1948-53
Austin A70 Hampshire 1948-51
Bedford...

details

Price from: £36.74 each (£44.09 inc. VAT)

Switch as Lucas PPG1 style light switch with pull/twist/pull action. Fits through 10mm hole max panel thickness 3mm with chrome retaining nut, hexagon shaft with spring loaded locating pin, three...

details

Price from: £148.00 each (£177.60 inc. VAT)

Dynamo / generator 12 volt. new made part (not refurbished)

details

Price from: £49.75 each (£59.70 inc. VAT)

12 volt 22A voltage regulator/control box with Lucar push-on terminals. Size approximately 85mm x 80mm x 95mm tall. black. 2 bobbin type. Equivalent to Lucas Part Numbers NCB101 and RB106....

details

Price from: £133.11 each (£159.73 inc. VAT)

Starter motor - newly manufactured part, not refurbished. Mounting bolt hole centres 4.5" apart on flange, starter comes with a two bolt fixing flange which suits other models.

details

Price from: £34.91 each (£41.89 inc. VAT)

Distributor cap (side outlet) for Lucas distributors, part ref DDB101 which replaces Lucas 54412472 and also Lucas 422905.

details

Price from: £5.91 each (£7.09 inc. VAT)

details

Price from: £3.40 each (£4.08 inc. VAT)

for use in 105E/123E engine, also on E93A and 100E Aquaplane head

details

Price from: £19.31 each (£23.17 inc. VAT)

Electrical temperature sender sensor unit, lucar terminal. thread approx 3/8" (10mm) outside. used 105E engine. Colour coded Blue.

details

Price from: £21.04 each (£25.25 inc. VAT)

electrical temperature sender sensor unit, lucar terminal. thread approx 5/8 (15.6mm) outside. used on Upright, 100E and some 105E engines. Colour coded Red.

details

Price from: £10.08 each (£12.10 inc. VAT)

Coil mounting bracket, two bolt fixing with elongated slots measuring 78mm max, 42mm min, will hold coil with a maximum diameter of 56mm.

details

Price from: £24.01 each (£28.81 inc. VAT)

12 volt ignition coil with push in top terminal

details

Price from: £12.75 each (£15.30 inc. VAT)

Distributor low tension lead assembly with points wire and Lucar wiring connector. Replaces Fod part number 105E-12049-A. Also equivalent to Lucas part number 54413549 for 22D6 and 22D4...

details

Price from: £12.83 each (£15.40 inc. VAT)

Hydraulic brake light switch with screw terminals. 1/8" NPT thread.

details

Price from: £27.71 each (£33.25 inc. VAT)

Floor mounted traditional dip switch for foot use, equivalent to Lucas part number 31284 (model FS22-1). Base plate measures 75mm x 40mm with 60mm hole centre fixing screws, three terminals with...

details

Price from: £33.40 each (£40.08 inc. VAT)

Battery isolating switch with flange (53mm hole centres) for panel fixing.
Black knob marked 'OFF' with arrow.
Requires 19.5mm hole and two 4mm fixing holes.
Two 10mm Copper studs with brass...

details

Price from: £2.61 each (£3.13 inc. VAT)

L86C champion spark plug, champion L10 equivalent item

details

Price from: £29.24 each (£35.09 inc. VAT)

Lucas RB340 type. Three bobbin.12V 22A Dynamo Voltage Regulator with Lucar terminals. Equivalent to Lucas part number NCB130, NCB132 (the uprated version of 11A NCB134/NCB136). E - earth, D -...

details

Price from: £9.66 each (£11.59 inc. VAT)

Contact set / ignition points set for late distributors on 105E model 1966 to 1968. Lucas type DSB753. As part reference Ford part 681F-12107-AA, Motorcraft EDP1, Ci ref CS110. Also application...

details

Price from: £252.00 each (£302.40 inc. VAT)

Post mount type, rebuilt exchange item. Please note there are 3 possibilities at pully fitting end, 1 taper shaft and 2 parallel. This is an exchange item - the customer must provide a core unit...

details

Price from: £5.91 Each (£7.09 inc. VAT)

Starter pinion retaining spring for the 10hp starter only, light-weight spring 24mm dia x 40mm long.

details

Price from: £29.29 each (£35.15 inc. VAT)

Period brake switch. Bakelite type body. Lever arm action which makes contact when pulled. Originally fitted to RHD Ford cars/5cwt van & LHD E83W.

details

Price from: £29.29 each (£35.15 inc. VAT)

Period brake switch. Bakelite type body. Lever arm action which makes contact when pulled. Originally fitted to RHD Ford E83W and LHD cars/5cwt van.

details

Price from: £103.45 Each (£124.14 inc. VAT)

8/10 hp ignition service kit, fits all models 1934-59. Kit includes distributor cap, contact breaker points, rotor arm, condenser, spark plug lead set and four spark plugs.

details

Price from: £23.83 each (£28.60 inc. VAT)

As Lucas pattern 51C 'pull on' brake switch, metal body 63mm wide x 35mm deep x 40mm tall with 51mm fixing hole centres, Flange mounted, brass screw terminals on top. Ford part reference Y-13480.

details

Price from: £0.46 each (£0.55 inc. VAT)

Spilt brass washer for distributor HT lead (each). 9.5mm diameter with 2mm hole.

details

Price from: £34.14 each (£40.97 inc. VAT)

Bulkhead fitting pull type starter switch (945), Lucas model type ST19/2, 76423 applicable for 6 or 12 volt application, all metal body with rubber shielded terminals for heavy cables. Ford part...

details

Price from: £18.44 Each (£22.13 inc. VAT)

Bulkhead fitting pull type starter switch (945), as Lucas model type ST19/2, applicable for 6 or 12 volt application, metal case with PVC terminal block. Terminals for heavy cables. A lower cost...

details

Price from: £39.29 each (£47.15 inc. VAT)

Starter switch that attaches to the motor case, as Lucas model type ST9, 76439, 764150. Applicable for 6 or 12 volt applications. Ford part reference BE-11450

details

Price from: £46.97 each (£56.36 inc. VAT)

8/10hp aluminium bracket which fits to side of engine (see fitting instructions to see illustration of item in place on engine) for allowing mounting of dynamo to side of engine (on specials etc)....

details

Price from: £31.12 each (£37.34 inc. VAT)

Early model Y 1932-1935

details

Price from: £16.03 each (£19.24 inc. VAT)

distributor cap for late 105E model 1965 on. push in connections. also fitted to Ford Fiesta 1976 on, Ford Escort 1100/1300 1971 on, Ford Escort, Mexico, RS1800, RS200 1970 on, Corsair (1966-70),...

details

Price from: £5.85 each (£7.02 inc. VAT)

Rotor arm equivalent to Lucas part number DSB752C. For late distributors on 105E model 1966 to 1968. Ford part number C6AH-12200. Motorcraft EDR3, CI reference R64. Other applications - Ford...

details

Price from: £6.75 each (£8.10 inc. VAT)

Condenser for late distributors on 105E model 1966 to 1968. Autolite type, as part reference Ford part C6AH-12300-A. Motorcraft EDC2, CI ref CON75, also application Ford Fiesta 1976 onward, Escort...

details

Price from: £18.32 SET (£21.98 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £18.95 SET (£22.74 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £18.95 SET (£22.74 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £18.95 SET (£22.74 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £18.95 SET (£22.74 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £19.38 SET (£23.26 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £18.95 SET (£22.74 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £19.38 SET (£23.26 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £18.95 SET (£22.74 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £19.38 SET (£23.26 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

8/10hp 1937 onwards

details

Price from: £19.38 SET (£23.26 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £18.95 SET (£22.74 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £18.95 SET (£22.74 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £18.97 SET (£22.76 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

8/10hp 1932-34

details

Price from: £18.53 SET (£22.24 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £18.95 SET (£22.74 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £18.95 SET (£22.74 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

fits D33 - C575 dynamo

details

Price from: £18.97 SET (£22.76 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

100E & 105E

details

Price from: £18.53 SET (£22.24 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £18.95 SET (£22.74 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £18.46 SET (£22.15 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

8/10hp 1932-37

details

Price from: £19.38 SET (£23.26 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £18.95 SET (£22.74 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £18.95 SET (£22.74 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £19.38 SET (£23.26 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £19.38 SET (£23.26 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £19.38 SET (£23.26 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

as Lucas 54212257

details

Price from: £19.38 SET (£23.26 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £18.97 SET (£22.76 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £18.95 SET of 3 (£22.74 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

8/10hp 1935-40

details

Price from: £18.95 SET (£22.74 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £18.97 SET (£22.76 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

Applications include Morris Eight Series E, M10/4 Series 3 and Series M

details

Price from: £18.95 SET (£22.74 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £18.97 SET (£22.76 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

Lucas ref 238061 . fits C45 C40 dynamo

details

Price from: £19.38 SET (£23.26 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

Equivalent to the Lucas 255659 set - applications include Morris Eight Series E and M10/4 Series 3

details

Price from: £18.95 SET (£22.74 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £18.64 SET (£22.37 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £18.95 SET (£22.74 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

details

Price from: £18.36 SET (£22.03 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

8/10hp 1940 onwards

details

Price from: £18.32 SET (£21.98 inc. VAT)

Two, three and four brush dynamo and starter brush sets.

100E

details

Price from: £52.00 each (£62.40 inc. VAT)

12 volt 22A Voltage regulator/control box with screw terminals. Size approximately 85mm x 80mm x 95mm tall. Black. 2 bobbin type. Equivalent to Lucas Part Numbers RB106 and NCB100. Mechanical unit...

details

Price from: £33.96 each (£40.75 inc. VAT)

Distributor body main bush, fits in the main body of the distributor through which centre drive rotates, 63mm long, 12.4mm inside diameter, 19mm outside diameter.

details

Price from: £9.94 each (£11.93 inc. VAT)

distributor cap spring clip, holds distributor cap onto the distributor body, fits distributors 1959-62, with round cap . overall length 78mm, 8mm wide.

details

Price from: £25.56 Each (£30.67 inc. VAT)

distributor drive shaft, 90mm overall length with two teeth on top and off-set groove at bottom.

details

Price from: £252.00 each (£302.40 inc. VAT)

3.5" diameter Dynamo (1945 - 1959) Rebuilt exchange item. This is an exchange item - the customer must provide a core unit in a suitable condition for refurbishment in addition to the cost of the...

details

Price from: £27.96 each (£33.55 inc. VAT)

HT lead set, made ready to fit, complete with push fit ends. note the spark firing order 1-2-4-3 (1 is front cylinder)

details

Price from: £252.00 each (£302.40 inc. VAT)

3.5" Dynamo (1939 - 1945) Rebuilt exchange item. This is an exchange item - the customer must provide a core unit in a suitable condition for refurbishment in addition to the cost of the unit. The...

details

Price from: £35.17 each (£42.20 inc. VAT)

6 volt ignition coil, push in terminal connection top

details

Price from: £32.76 each (£39.31 inc. VAT)

6 volt ignition coil with acorn nut connection for the high tension lead, twin lucar terminals, supplied with mounting bracket.

details

Price from: £236.77 each (£284.12 inc. VAT)

4.5" Diameter Dynamo (1945 - 1948) Rebuilt exchange item. This is an exchange item - the customer must provide a core unit in a suitable condition for refurbishment in addition to the cost of the...

details

Price from: £106.15 each (£127.38 inc. VAT)

New made 6 volt cut out regulator unit as Lucas RB106 type, 5 screw terminals, 2 bobbin, size approx 85mm x 80mm x 95mm tall.

details

Price from: £294.00 each (£352.80 inc. VAT)

Exchange refurbished 6 volt starter motor 10hp, approx 110mm diameter. This is an exchange item - the customer must provide a core unit in a suitable condition for refurbishment in addition to the...

details

Price from: £11.81 each (£14.17 inc. VAT)

distributor drive shaft coupling, 68mm long, 12mm diameter with drive slots top and bottom, slots measure 12mm long x 8mm deep x 3mm wide.

details

Price from: £4.85 each (£5.82 inc. VAT)

hard black plastic cap to fit on spark plug top

details

Price from: £5.85 each (£7.02 inc. VAT)

details

Price from: £0.05 each (£0.06 inc. VAT)

Made to an original pattern and offered in various finishes. Braided cable with braided outer or braided cable with plastic outer or PVC cable with plastic outer. We do not handle these products...

details

Price from: £11.16 each (£13.39 inc. VAT)

distributor drive shaft coupling, 64mm long, 12mm diameter with drive slots top and bottom, slots measure 12mm long x 8mm deep x 3mm wide.

details

Price from: £252.00 each (£302.40 inc. VAT)

Reconditioned exchange item. This is a exchange service - the customer must provide a core unit in a suitable condition for refurbishment in addition to the cost of the unit. The old core unit...

details

Price from: £12.51 Each (£15.01 inc. VAT)

Dynamo drive end (front) sealed bearing, dimensions o/d 35mm, i/d 15mm, 11mm wide. Fits all models with a Dynamo fitted

details

Price from: £14.94 each (£17.93 inc. VAT)

early type dynamo holding strap tensioning eye bolt, for the early (1932-39) post type dynamo bracket, secures to strap with a pin and then passes through the post mounting bracket and is...

details

Price from: £50.96 each (£61.15 inc. VAT)

6 volt new unused old stock item

details

Price from: £252.00 each (£302.40 inc. VAT)

Exchange refurbished 6 volt starter motor 8hp, approx 90mm diameter. This is an exchange item - the customer must provide a core unit in a suitable condition for refurbishment in addition to the...

details

Price from: £235.80 each (£282.96 inc. VAT)

Rebuilt distributor assembly, used 1935 to 1959, fitted with new cap, points, condenser, rotor etc, exchange item. Old unit must be in a good servicable condition, special attention needs to be...

details

Price from: £58.17 each (£69.80 inc. VAT)

Note the spark firing order 1-2-4-3 (1 is front cylinder). New old stock.

details

Price from: £45.09 each (£54.11 inc. VAT)

Note the spark firing order 1-2-4-3 (1 is front cylinder)

details

Price from: £3.72 each (£4.46 inc. VAT)

Distributor cap carbon brush & spring, fits inside top of the distributor cap connecting rotor arm to main ht coil lead, equivalent to Lucas part numbers 451260 and 404435. Carbon brush 10mm...

details

Price from: £8.46 each (£10.15 inc. VAT)

Distributor body main bush, fits in the main body of the distributor through which centre drive rotates, two bushes per distributor, 21mm long, 12.4mm inside diameter, 15.9mm outside diameter.

details

Price from: £12.11 Each (£14.53 inc. VAT)

Distributor oiler fitted to Ford 8/10hp units, screws into the base of the body and lubricates cam and balance weights, screw in type with 1/4"-20 UNC thread.

details

Price from: £9.94 each (£11.93 inc. VAT)

distributor cap spring clip, holds distributor cap onto the distributor body, fits distributors 1935-59, overall length 75mm, 8mm wide.

details

Price from: £14.07 each (£16.88 inc. VAT)

distributor contact point set - as Lucas 407050, which has very wide application.

one piece each 12162, 12153 & 12160 shown on diagrams.

new re-manufactured part

details

Price from: £14.07 each (£16.88 inc. VAT)

distributor contact point set - as Lucas 407050, which has very wide application.

one piece each 12162, 12153 & 12160 shown on diagrams.

details